<?xml version="1.0" encoding="UTF-8"?><metadata xml:lang="en">
<idinfo>
<citation>
<citeinfo>
<origin>Yellowstone County GIS</origin>
<pubdate>20060515</pubdate>
<title Sync="TRUE">ycirr</title>
<geoform Sync="TRUE">vector digital data</geoform>
<ftname Sync="TRUE">ycirr</ftname>
<onlink Sync="FALSE">withheld</onlink>
</citeinfo>
</citation>
<descript>
<abstract>Irrigation District Boundary
The boundaries are generally based on parcel data which is based on the USDI Bureau of Land Management's (BLM) Geographic Coordinate Database (GCDB). The GCDB is a complex measurement management system that uses a least squares adjustment of existing survey data to come up with a digital representation of the Public Land Survey System (PLSS). For more information on GCDB, see the Montana/North Dakota BLM website at http://www.mt.blm.gov/cadastral/gcdb/index.html. Accuracy varies between townships and it is important to note that the accuracy of the data can't be any more accurate than the GCDB.
The legal description of the Lockwood and Huntley districts references the banks of ditches/canals for boundaries. Because this information is not currently available in GIS, where applicable the parcel boundary was offset slightly to approximate the ditch bank.
For the Danford and Victory districts, a good portion of the boundaries lie outside Yellowstone County making it more difficult to define the boundaries due to available data sources. Some to the legal descriptions are very vague by only referencing the amount of acreage in a particular quarter section.</abstract>
<purpose>To delineate boundaries of all the Irrigation districts and identifly parcels w/in each district.</purpose>
<langdata Sync="TRUE">en</langdata>
</descript>
<timeperd>
<timeinfo>
<sngdate>
<caldate>20070706</caldate>
</sngdate>
</timeinfo>
<current>ground condition</current>
</timeperd>
<status>
<progress>Complete</progress>
<update>As needed</update>
</status>
<spdom>
<bounding>
<westbc Sync="TRUE">-108.931453</westbc>
<eastbc Sync="TRUE">-107.449769</eastbc>
<northbc Sync="TRUE">46.507989</northbc>
<southbc Sync="TRUE">45.447285</southbc>
</bounding>
<lboundng>
<leftbc Sync="TRUE">652876.974220</leftbc>
<rightbc Sync="TRUE">756646.375000</rightbc>
<topbc Sync="TRUE">211437.046875</topbc>
<bottombc Sync="TRUE">148162.732624</bottombc>
</lboundng>
</spdom>
<keywords>
<theme>
<themekey>Lockwood</themekey>
<themekey>Irrigation</themekey>
<themekey>Yellowstone</themekey>
<themekey>Huntley</themekey>
<themekey>Victory</themekey>
<themekey>Danford</themekey>
</theme>
<place>
<placekey>Lockwood</placekey>
<placekey>Yellowstone</placekey>
<placekey>Huntley</placekey>
</place>
</keywords>
<useconst>
These data do not constitute a legal survey. Inaccuracies exist with the boundaries; when seeking the definitive description of real property, consult the records at the local county courthouse.
Please be aware that these data are constantly being changed and updated. Rather than distribute the data to second parties; please refer interested parties to Yellowtone County for the most recent version of the data.
This data set is provided "as-is" without warranty of any kind. The user assumes responsibility to determine the suitablilty of the data for their purposes. Yellowstone County makes no representations or warranties whatsoever with respect to the accuracy or completeness of this data set and assumes no responsibility for the suitability of this data set for a particular purpose; and will not be liable for any damages incurred as a result of errors in this data set. </useconst>
<ptcontac>
<cntinfo>
<cntorgp>
<cntorg>Yellowstone County</cntorg>
<cntper>Annette Cabrera</cntper>
</cntorgp>
<cntpos>GIS Manager</cntpos>
<cntaddr>
<addrtype>mailing address</addrtype>
<address>P.O. Box 35043</address>
<city>Billings</city>
<state>MT</state>
<postal>59107</postal>
<country>US</country>
</cntaddr>
<cntvoice>406-256-2773</cntvoice>
<cntemail>acabrera@co.yellowstone.mt.gov</cntemail>
</cntinfo>
</ptcontac>
<native Sync="FALSE">ESRI ArcCatalog 9.2.2.1350</native>
<natvform Sync="TRUE">ArcInfo Coverage</natvform>
</idinfo>
<dataqual>
<posacc>
<horizpa>
<horizpar>This data can be no more accurate than the GCDB data it is based on. The accuracy of the GCDB is variable. To find the digital accuracy of a GCDB township, download the township's file from http://www.mt.blm.gov/cadastral/pub/ and examine the .pgc file. </horizpar>
</horizpa>
</posacc>
<lineage>
<procstep>
<procdesc>Victory Irrigation District
An expansion done in Mar '03 (see recorded documents in Clerk of District Court) referenced the new land (95% of it was in Big Horn County) in number of acres per quarter section and not by any "legal description" describing the boundaries. Looking at an aerial photography collected in the summer of 2005, I was able to determine where the area was and basically, outlined the area, making it a best guess on the amount of acres per quarter section.
Danford Irrigation District
Over half the district is in Carbon County and while the descriptions were good, the GCDB idoes not align with the aerial photography. I adjusted the district to better line up with the aerials, hence shifting it away from the GCDB.
The legal description of the Lockwood and Huntley districts references the banks of ditches/canals for boundaries. Because this information is not currently available in GIS, where applicable the parcel boundary was offset slightly to approximate the ditch bank.
Lockwood and Huntley districts reference the banks of ditches/canals for boundaries. Because this linework is not currently available, where applicable the boundary was based on aerial imagery to approximate the bank line.</procdesc>
<proccont>
<cntinfo>
<cntorgp>
<cntorg>Yellowstone County GIS</cntorg>
<cntper>Mike Powell</cntper>
</cntorgp>
<cntpos>GIS Technician</cntpos>
<cntvoice>406-256-2812</cntvoice>
<cntemail>mpowell@co.yellowstone.mt.gov</cntemail>
</cntinfo>
</proccont>
</procstep>
</lineage>
<logic>Boundaries were generally derived from legal descriptions of the districts as recorded and stored in the Clerk of District Court office. They are based on GCDB and parcel data. For exceptions see Process Steps.</logic>
</dataqual>
<spdoinfo>
<direct Sync="TRUE">Vector</direct>
<ptvctinf>
<esriterm Name="IrrDists_Dissolve">
<efeatyp Sync="TRUE">Simple</efeatyp>
<efeageom Sync="TRUE" code="4"/>
<esritopo Sync="TRUE">FALSE</esritopo>
<efeacnt Sync="TRUE">0</efeacnt>
<spindex Sync="TRUE">TRUE</spindex>
<linrefer Sync="TRUE">FALSE</linrefer>
</esriterm>
</ptvctinf>
</spdoinfo>
<spref>
<horizsys>
<planar>
<planci>
<plance Sync="TRUE">coordinate pair</plance>
<coordrep>
<absres Sync="TRUE">0.000256</absres>
<ordres Sync="TRUE">0.000256</ordres>
</coordrep>
<plandu Sync="TRUE">meters</plandu>
</planci>
</planar>
<geodetic>
<horizdn Sync="TRUE">North American Datum of 1983</horizdn>
<ellips Sync="TRUE">Geodetic Reference System 80</ellips>
<semiaxis Sync="TRUE">6378137.000000</semiaxis>
<denflat Sync="TRUE">298.257222</denflat>
</geodetic>
<cordsysn>
<geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn>
<projcsn Sync="TRUE">NAD_1983_StatePlane_Montana_FIPS_2500</projcsn>
</cordsysn>
</horizsys>
</spref>
<eainfo>
<detailed Name="IrrDists_Dissolve">
<enttyp>
<enttypl Sync="FALSE">IrrDists_Dissolve</enttypl>
<enttypc Sync="TRUE">0</enttypc>
<enttypt Sync="TRUE">Feature Class</enttypt>
</enttyp>
<attr>
<attrlabl Sync="TRUE">OBJECTID</attrlabl>
<attalias Sync="TRUE">OBJECTID</attalias>
<attrtype Sync="TRUE">OID</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape</attrlabl>
<attrdef Sync="TRUE">Feature geometry.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Coordinates defining the features.</udom>
</attrdomv>
<atprecis Sync="TRUE">0</atprecis>
<attalias Sync="TRUE">Shape</attalias>
<attrtype Sync="TRUE">Geometry</attrtype>
<attscale Sync="TRUE">0</attscale>
<attwidth Sync="TRUE">8</attwidth>
</attr>
<attr>
<attrlabl Sync="TRUE">NAME</attrlabl>
<attalias Sync="TRUE">NAME</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">30</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape.STArea()</attrlabl>
<attalias Sync="TRUE">Shape.STArea()</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape.STLength()</attrlabl>
<attalias Sync="TRUE">Shape.STLength()</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
</detailed>
<detailed Name="pat">
<enttyp>
<enttypl Sync="FALSE">pat</enttypl>
<enttypt Sync="TRUE">Feature Class</enttypt>
<enttypc Sync="TRUE">52</enttypc>
</enttyp>
<attr>
<attrlabl Sync="TRUE">FID</attrlabl>
<attalias Sync="TRUE">FID</attalias>
<attrtype Sync="TRUE">OID</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape</attrlabl>
<attalias Sync="TRUE">Shape</attalias>
<attrtype Sync="TRUE">Geometry</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Feature geometry.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Coordinates defining the features.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">AREA</attrlabl>
<attwidth Sync="TRUE">8</attwidth>
<atoutwid Sync="TRUE">18</atoutwid>
<attrtype Sync="TRUE">Float</attrtype>
<atnumdec Sync="TRUE">5</atnumdec>
<attrdef Sync="TRUE">Area of feature in internal units squared.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Positive real numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">PERIMETER</attrlabl>
<attwidth Sync="TRUE">8</attwidth>
<atoutwid Sync="TRUE">18</atoutwid>
<attrtype Sync="TRUE">Float</attrtype>
<atnumdec Sync="TRUE">5</atnumdec>
<attrdef Sync="TRUE">Perimeter of feature in internal units.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Positive real numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">YCIRR#</attrlabl>
<attwidth Sync="TRUE">4</attwidth>
<atoutwid Sync="TRUE">5</atoutwid>
<attrtype Sync="TRUE">Binary</attrtype>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">YCIRR-ID</attrlabl>
<attwidth Sync="TRUE">4</attwidth>
<atoutwid Sync="TRUE">5</atoutwid>
<attrtype Sync="TRUE">Binary</attrtype>
<attrdef Sync="TRUE">User-defined feature number.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
</attr>
<attr>
<attrlabl Sync="TRUE">NAME</attrlabl>
<attwidth Sync="TRUE">30</attwidth>
<atoutwid Sync="TRUE">30</atoutwid>
<attrtype Sync="TRUE">Character</attrtype>
<attrdef>Name of district</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">DIVISION</attrlabl>
<attwidth Sync="TRUE">30</attwidth>
<atoutwid Sync="TRUE">30</atoutwid>
<attrtype Sync="TRUE">Character</attrtype>
<attrdef>Division of district for board member elections</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">EXCLUDED</attrlabl>
<attwidth Sync="TRUE">5</attwidth>
<atoutwid Sync="TRUE">5</atoutwid>
<attrtype Sync="TRUE">Character</attrtype>
<attrdef>Value of 'YES' indicates area excluded from district according to legal description</attrdef>
</attr>
</detailed>
<detailed Name="nat">
<enttyp>
<enttypl Sync="FALSE">nat</enttypl>
<enttypt Sync="TRUE">Feature Class</enttypt>
<enttypc Sync="TRUE">1548</enttypc>
</enttyp>
<attr>
<attrlabl Sync="TRUE">FID</attrlabl>
<attalias Sync="TRUE">FID</attalias>
<attrtype Sync="TRUE">OID</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape</attrlabl>
<attalias Sync="TRUE">Shape</attalias>
<attrtype Sync="TRUE">Geometry</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Feature geometry.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Coordinates defining the features.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">ARC#</attrlabl>
<attwidth Sync="TRUE">4</attwidth>
<atoutwid Sync="TRUE">5</atoutwid>
<attrtype Sync="TRUE">Binary</attrtype>
</attr>
<attr>
<attrlabl Sync="TRUE">YCIRR#</attrlabl>
<attwidth Sync="TRUE">4</attwidth>
<atoutwid Sync="TRUE">5</atoutwid>
<attrtype Sync="TRUE">Binary</attrtype>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">YCIRR-ID</attrlabl>
<attwidth Sync="TRUE">4</attwidth>
<atoutwid Sync="TRUE">5</atoutwid>
<attrtype Sync="TRUE">Binary</attrtype>
<attrdef Sync="TRUE">User-defined feature number.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
</attr>
</detailed>
</eainfo>
<distinfo>
<stdorder>
<digform>
<digtinfo>
<transize Sync="TRUE">0.320</transize>
<dssize Sync="TRUE">0.320</dssize>
</digtinfo>
</digform>
</stdorder>
<resdesc Sync="TRUE">Downloadable Data</resdesc>
</distinfo>
<metainfo>
<metd Sync="TRUE">20070709</metd>
<metc>
<cntinfo>
<cntorgp>
<cntorg>Yellowstone County</cntorg>
<cntper>Mike Powell</cntper>
</cntorgp>
<cntpos>GIS Technician</cntpos>
<cntaddr>
<addrtype>mailing address</addrtype>
<address>P.O. Box 35043</address>
<city>Billings</city>
<state>MT</state>
<postal>59107</postal>
</cntaddr>
<cntvoice>406-256-2812</cntvoice>
<cntemail>mpowell@co.yellowstone.mt.us</cntemail>
</cntinfo>
</metc>
<metstdn Sync="TRUE">FGDC Content Standards for Digital Geospatial Metadata</metstdn>
<metstdv Sync="TRUE">FGDC-STD-001-1998</metstdv>
<mettc Sync="TRUE">local time</mettc>
<langmeta Sync="TRUE">en</langmeta>
</metainfo>
<dataIdInfo>
<envirDesc Sync="FALSE">Esri ArcGIS 13.1.3.41833</envirDesc>
<dataLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</dataLang>
<geoBox esriExtentType="decdegrees">
<westBL Sync="TRUE">-108.931453</westBL>
<eastBL Sync="TRUE">-107.449769</eastBL>
<northBL Sync="TRUE">46.507989</northBL>
<southBL Sync="TRUE">45.447285</southBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</geoBox>
<idCitation>
<resTitle Sync="FALSE">IrrDists_Dissolve</resTitle>
<presForm>
<PresFormCd Sync="TRUE" value="005"/>
</presForm>
</idCitation>
<spatRpType>
<SpatRepTypCd Sync="TRUE" value="001"/>
</spatRpType>
<dataExt>
<geoEle>
<GeoBndBox esriExtentType="native">
<westBL Sync="TRUE">652876.97422</westBL>
<northBL Sync="TRUE">211437.046875</northBL>
<southBL Sync="TRUE">148162.732624</southBL>
<eastBL Sync="TRUE">756646.375</eastBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</GeoBndBox>
</geoEle>
</dataExt>
<dataExt>
<geoEle>
<GeoBndBox esriExtentType="search">
<exTypeCode Sync="TRUE">1</exTypeCode>
<westBL Sync="TRUE">-108.822279</westBL>
<eastBL Sync="TRUE">-107.471663</eastBL>
<northBL Sync="TRUE">46.150566</northBL>
<southBL Sync="TRUE">45.565060</southBL>
</GeoBndBox>
</geoEle>
</dataExt>
</dataIdInfo>
<distInfo>
<distributor>
<distorTran>
<onLineSrc>
<orDesc Sync="TRUE">002</orDesc>
<protocol Sync="TRUE">Local Area Network</protocol>
<linkage Sync="FALSE">withheld</linkage>
</onLineSrc>
<transSize Sync="TRUE">0.320</transSize>
</distorTran>
<distorFormat>
<formatName Sync="TRUE">ArcInfo Coverage</formatName>
</distorFormat>
</distributor>
<distFormat>
<formatName Sync="TRUE">Enterprise Geodatabase Feature Class</formatName>
</distFormat>
</distInfo>
<Esri>
<ModDate>20240906</ModDate>
<ModTime>16212900</ModTime>
<SyncDate>20240906</SyncDate>
<SyncOnce>FALSE</SyncOnce>
<SyncTime>16212900</SyncTime>
<CreaDate>20140328</CreaDate>
<CreaTime>16560200</CreaTime>
<DataProperties>
<itemProps>
<itemName Sync="FALSE">IrrDists_Dissolve</itemName>
<imsContentType Sync="TRUE">002</imsContentType>
<nativeExtBox>
<westBL Sync="TRUE">652876.792000</westBL>
<eastBL Sync="TRUE">756646.375000</eastBL>
<southBL Sync="TRUE">148161.367400</southBL>
<northBL Sync="TRUE">211437.046900</northBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</nativeExtBox>
</itemProps>
<coordRef>
<type Sync="TRUE">Projected</type>
<geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn>
<csUnits Sync="TRUE">Linear Unit: Meter (1.000000)</csUnits>
<projcsn Sync="TRUE">NAD_1983_StatePlane_Montana_FIPS_2500</projcsn>
<peXml Sync="TRUE">&lt;ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/3.1.0'&gt;&lt;WKT&gt;PROJCS[&amp;quot;NAD_1983_StatePlane_Montana_FIPS_2500&amp;quot;,GEOGCS[&amp;quot;GCS_North_American_1983&amp;quot;,DATUM[&amp;quot;D_North_American_1983&amp;quot;,SPHEROID[&amp;quot;GRS_1980&amp;quot;,6378137.0,298.257222101]],PRIMEM[&amp;quot;Greenwich&amp;quot;,0.0],UNIT[&amp;quot;Degree&amp;quot;,0.0174532925199433]],PROJECTION[&amp;quot;Lambert_Conformal_Conic&amp;quot;],PARAMETER[&amp;quot;False_Easting&amp;quot;,600000.0],PARAMETER[&amp;quot;False_Northing&amp;quot;,0.0],PARAMETER[&amp;quot;Central_Meridian&amp;quot;,-109.5],PARAMETER[&amp;quot;Standard_Parallel_1&amp;quot;,45.0],PARAMETER[&amp;quot;Standard_Parallel_2&amp;quot;,49.0],PARAMETER[&amp;quot;Latitude_Of_Origin&amp;quot;,44.25],UNIT[&amp;quot;Meter&amp;quot;,1.0],AUTHORITY[&amp;quot;EPSG&amp;quot;,32100]]&lt;/WKT&gt;&lt;XOrigin&gt;-35666000&lt;/XOrigin&gt;&lt;YOrigin&gt;-30006900&lt;/YOrigin&gt;&lt;XYScale&gt;10000&lt;/XYScale&gt;&lt;ZOrigin&gt;0&lt;/ZOrigin&gt;&lt;ZScale&gt;1&lt;/ZScale&gt;&lt;MOrigin&gt;0&lt;/MOrigin&gt;&lt;MScale&gt;1&lt;/MScale&gt;&lt;XYTolerance&gt;0.001&lt;/XYTolerance&gt;&lt;ZTolerance&gt;0.001&lt;/ZTolerance&gt;&lt;MTolerance&gt;0.001&lt;/MTolerance&gt;&lt;HighPrecision&gt;true&lt;/HighPrecision&gt;&lt;WKID&gt;32100&lt;/WKID&gt;&lt;LatestWKID&gt;32100&lt;/LatestWKID&gt;&lt;/ProjectedCoordinateSystem&gt;</peXml>
</coordRef>
</DataProperties>
<ArcGISFormat>1.0</ArcGISFormat>
<ArcGISstyle>FGDC CSDGM Metadata</ArcGISstyle>
</Esri>
<mdChar>
<CharSetCd Sync="TRUE" value="004"/>
</mdChar>
<mdDateSt Sync="TRUE">20240906</mdDateSt>
<mdHrLv>
<ScopeCd Sync="TRUE" value="005"/>
</mdHrLv>
<mdHrLvName Sync="TRUE">dataset</mdHrLvName>
<mdLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</mdLang>
<mdStanName Sync="TRUE">ISO 19115 Geographic Information - Metadata</mdStanName>
<mdStanVer Sync="TRUE">DIS_ESRI1.0</mdStanVer>
<refSysInfo>
<RefSystem>
<refSysID>
<identCode Sync="TRUE" code="32100">NAD_1983_StatePlane_Montana_FIPS_2500</identCode>
<idCodeSpace Sync="TRUE">EPSG</idCodeSpace>
<idVersion Sync="TRUE">4.5(3.0.1)</idVersion>
</refSysID>
</RefSystem>
</refSysInfo>
<spatRepInfo>
<VectSpatRep>
<geometObjs Name="IrrDists_Dissolve">
<geoObjTyp>
<GeoObjTypCd Sync="TRUE" value="002"/>
</geoObjTyp>
<geoObjCnt Sync="TRUE">0</geoObjCnt>
</geometObjs>
<topLvl>
<TopoLevCd Sync="TRUE" value="001"/>
</topLvl>
</VectSpatRep>
</spatRepInfo>
</metadata>
